The LATH transport anchors are used as an economical way to achieve high tension loads in thin panels or low compressive strength concrete. The Two-Hole anchor requires a tension bar in the bottom hole of the anchor to distribute the tension forces deep in the concrete. The tension bar must be positioned and secured against the bottom of the tension bar hole to ensure immediate engagement of the anchor when load is applied.
Two Hole Transport Anchor are designed to load range 0.7t to 26t. It’s used for pre-stressed concrete trusses, thin walls.
The Two Hole Transport Anchors are available in the sizes shown in the table and in plain or hot dip galvanized finish