Call our Sales Team
0345 519 1973

Our Lifting Stud Spherical Head Anchor System has the tonnage and length stamped onto the anchor head so a quick check can be made to ensure the correct length anchor has been fitted to the unit. In addition a batch number on the base gives us full traceability of the product. (NOW C.E Approved and Marked on the Foot)

Under most conditions the design of the anchor means no additional reinforcement is required as the forces are transferred into the concrete from the design of the foot of the anchor pin. Please check with our techinical support for a design plan for your project.

Anchors in this load group use our Lifting Eye Code LSLE10

AXIAL LOAD 7.5 TON
LSF075/095*95mm**
LSF075/100*100mm
LSF075/120*120mm**
LSF075/140*140mm
LSF075/165*165mm**
LSF075/200*200mm**
LSF075/240*240mm
LSF075/300*300mm**
AXIAL LOAD 10.0 TON
LSF100/115*115mm**
LSF100/135*135mm**
LSF100/150*150mm
LSF100/170*170mm**
LSF100/200*200mm
LSF100/250*250mm**
LSF100/340*340mm**
Replace * with B = Black G = HDG S = Stainless Steel

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK